If not connected to an SSID, a message is
displayed at the bottom of the screen and the
survey will not start.
Collect data as you would a passive survey
described above.
If the connection is lost, the link notification
changes to an X. CyberScope Air continuously
tries to reconnect to the SSID.
Survey points taken during this unlinked time
are displayed in Yellow. These indicate areas
where there is not coverage for that SSID.
When you finish adding data points or if you
want to pause the survey, tap STOP.
Tap RESUME to add more data points.
Tap the Link-Live upload icon to send your
survey results to Link-Live's AirMapper page.
Adding Wi-Fi Management Port
Data
If the Wi-Fi Management port is connected to an
SSID, its active connection data is added to any
survey points taken. It doesn't matter what type
AirMapper™ App
588
To Next Page
Loading...