The top Path Analysis results card shows the
path's Destination address at the top, followed
by the three response times from the TCP
Connect, Ping, or Echo tests.
Device Name: Resolved DNS name or IP address
of the destination entered in the settings
IP Address: IPv4 address of the target des-
tination
Interface: The Interface option selected in
the settings
Protocol: The Protocol selected in the
settings (TCP, Ping, or Echo)
TCP Port: The port number used for a TCP
Connect Protocol. This field does not appear
for Ping or Echo Protocol results.
Results
Started: Time at which the Path Analysis
began
Status: Current status of the Path Analysis
test, including any error messages
Path Analysis App
603
To Next Page
Loading...