netAlly CyberScope Air - Page 81

Internet access and a more stable network
connection than the Test Port, which may
frequently drop links and reconnect or resume
scanning.
CyberScope Air can run Discovery, Ping/TCP
Connect tests, Path Analysis, and iPerf tests on
the management port, but not AutoTests or
packet captures.
USB Wired Management Port: You can use a
USB-to-Ethernet adapter to run an alternative
wired management port for your CyberScope
Air. This option allows you to set up a stable
wired connection for system updates, updating
software, communicating with Link-Live,
APuplinks, and for running basic wired tests
that can help diagnose problems that may affect
Wi-Fi devices.
NOTE: NetAlly has tested many but not all
USB-to-Ethernet adapters for compliance
with the CyberScope Air. The following
adapters are supported:
l
j5create model JUE130 (USB 3.0)
l
StarTech.com model USB21000S
General Settings and Tools
81