NetApp ASA C Series System Documentation

Thumbscrew
Cam handle
5. Pull the cam handle downward and begin to slide the controller module out of the chassis.
Make sure that you support the bottom of the controller module as you slide it out of the chassis.
Step 3: Replace a PCIe card
To replace a PCIe card, locate it within the controller and follow the specific sequence of
steps.
1. Loosen the thumbscrew on the controller module side panel.
2. Swing the side panel off the controller module.
Side panel
PCIe card
1292

NetApp ASA C Series Specifications

General

Brand	NetApp
Model	ASA C Series
Category	Storage
Language	English