b.
Assign each drive:
storage disk assign -disk disk_name -owner owner_name
You can enter the command on either controller module.
You can use the wildcard character to assign more than one drive at once.
c.
Reenable automatic drive assignment if needed:
storage disk option modify -node
node_name -autoassign on
You must reenable automatic drive assignment on both controller modules.
13. Return the failed part to NetApp, as described in the RMA instructions shipped with the kit.
Contact technical support at NetApp Support, 888-463-8277 (North America), 00-800-44-638277
(Europe), or +800-800-80-800 (Asia/Pacific) if you need the RMA number or additional help with the
replacement procedure.
All SAN Array systems
All SAN Array systems
You can use the AFF documentation with your ASA system. The information for AFF
models applies to the corresponding ASA system. For example, all cabling and other
information for the AFF A400 system also applies to the ASA AFF A400 system.
All SAN Array Software Configuration
Hardware upgrade
Upgrade procedures
AFF or FAS controller module upgrade procedures have moved
here.
1491
To Next Page
Loading...
Need help?
General
