NetApp ASA C Series System Documentation

After you issue the command, you should wait until the system stops at the LOADER prompt.
2. At the LOADER prompt, access the special drivers specifically designed for system-level diagnostics to
function properly:
boot_diags
During the boot process, you can safely respond y to the prompts until the Maintenance mode prompt (*>)
appears.
3.
Display and note the available devices on the controller module:
sldiag device show -dev mb
The controller module devices and ports displayed can be any one or more of the following:
◦
bootmedia is the system booting device..
◦ cna is a Converged Network Adapter or interface not connected to a network or storage device.
◦ fcal is a Fibre Channel-Arbitrated Loop device not connected to a Fibre Channel network.
◦
env is motherboard environmentals.
◦ mem is system memory.
◦ nic is a network interface card.
◦
nvram is nonvolatile RAM.
◦
nvmem is a hybrid of NVRAM and system memory.
◦
sas is a Serial Attached SCSI device not connected to a disk shelf.
4. Run diagnostics as desired.
41

NetApp ASA C Series Specifications

General

Brand	NetApp
Model	ASA C Series
Category	Storage
Language	English