NetApp ASA C Series System Documentation

Air duct locking tabs
Slide air duct towards fan modules
Rotate air duct towards fan modules
Step 2: Move the power supplies
You must move the power supplies from the impaired controller module to the
replacement controller module when you replace a controller module.
1. Rotate the cam handle such that it can be used to pull power supply out of the controller module while
pressing the locking tab.
CAUTION:
The power supply is short. Always use two hands to support it when removing it from the controller module
so that it does not suddenly swing free from the controller module and injure you.
879

NetApp ASA C Series Specifications

General

Brand	NetApp
Model	ASA C Series
Category	Storage
Language	English