NetApp E Series Hardware Maintainence Manual

(1) Battery release latch
(2) Battery
5. Lift up on the battery, and slide it out of the controller canister.
6. Follow the appropriate procedures for your location to recycle or dispose of the failed battery.
To comply with International Air Transport Association (IATA) regulations, never ship a
lithium battery by air unless it is installed within the controller shelf.
7. Go to Install new battery.
Install new E2800 battery
After removing the failed battery, you can install the new one.
What you’ll need
• The replacement battery.
• A flat, static-free surface.
Steps
109

NetApp E Series Specifications

General

Form Factor	2U, 4U
Drive Types	SSD
Host Interface	SAS, iSCSI, FC, IB
RAID Levels	RAID 0, 1, 5, 6, 10
Operating System Compatibility	Windows, Linux, VMware
Management Software	SANtricity