NetApp E Series Hardware Maintainence Manual

◦
Incorrect — The battery’s metal flange is not inserted into the slot on the controller:
6. Go to Re-install E2800 controller canister.
Re-install E2800 controller canister
Reinstall the controller canister into the controller shelf after installing the new battery.
Steps
1. Reinstall the cover on the controller canister by sliding the cover from back to front until the button clicks.
2. Turn the controller canister over, so that the removable cover faces down.
3. With the cam handle in the open position, slide the controller canister all the way into the controller shelf.
111

NetApp E Series Specifications

General

Form Factor	2U, 4U
Drive Types	SSD
Host Interface	SAS, iSCSI, FC, IB
RAID Levels	RAID 0, 1, 5, 6, 10
Operating System Compatibility	Windows, Linux, VMware
Management Software	SANtricity