EasyManua.ls Logo

NetApp E Series - Page 43

NetApp E Series
133 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Do not use excessive force when sliding the power canister into the system; you can
damage the connector.
3. Close the cam handle so that the latch clicks into the locked position and the power canister is fully seated.
4. Reconnect the power cord to the power canister, and secure the power cord to the power canister using
the power cord retainer.
5. Turn on the power to the new power canister.
Step 4: Complete power canister replacement
Confirm that the new power canister is working correctly, gather support data, and resume normal operations.
Steps
1. On the new power canister, check that the green Power LED is on and the amber Attention LED is OFF.
2. From the Recovery Guru in SANtricity System Manager, select Recheck to ensure the problem has been
resolved.
3. If a failed power canister is still being reported, repeat the steps in
Step 2: Remove failed power canister
and in Step 3: Install new power canister. If the problem persists, contact technical support.
4. Remove the antistatic protection.
5. Collect support data for your storage array using SANtricity System Manager.
If a problem occurs during this procedure, you can use the saved file to troubleshoot the issue. The system
will save inventory, status, and performance data about your storage array in a single file.
a.
Select Support
Support Center Diagnostics.
b. Select Collect Support Data.
c. Click Collect.
The file is saved in the Downloads folder for your browser with the name, support-data.7z.
6. Return the failed part to NetApp, as described in the RMA instructions shipped with the kit.
What’s next?
Your power canister replacement is complete. You can resume normal operations.
Replace E5700 fan canister (60-drive)
You can replace a fan canister in an E5700 array with a 60-drive shelf, which include the
following shelf types:
E5760 controller shelf
DE460C drive shelf
About this task
Each 60-drive controller shelf or drive shelf includes two fan canisters. If a fan canister fails, you must replace it
as soon as possible to ensure that the shelf has adequate cooling.
41

Other manuals for NetApp E Series

Related product manuals