NetApp FAS8300 User Manual

If the command fails, contact NetApp Support.
mysupport.netapp.com
b.
Verify that the
Restored column equals yes for all authentication keys: security key-manager
key query
c. Shut down the impaired node.
4.
If the
Key Manager type displays onboard and the Restored column displays anything other than yes:
a.
Enter the onboard security key-manager sync command:
security key-manager onboard sync
Enter the customer’s onboard key management passphrase at the prompt. If the
passphrase cannot be provided, contact NetApp Support.
mysupport.netapp.com
b.
Verify the
Restored column shows yes for all authentication keys: security key-manager key
query
c.
Verify that the
Key Manager type shows onboard, manually backup the OKM information.
d.
Go to advanced privilege mode and enter
y when prompted to continue: set -priv advanced
e.
Enter the command to display the key management backup information:
security key-manager
onboard show-backup
f. Copy the contents of the backup information to a separate file or your log file. You’ll need it in disaster
scenarios where you might need to manually recover OKM.
g.
Return to admin mode:
set -priv admin
h. You can safely shutdown the node.
Verify NSE configuration
1.
Display the key IDs of the authentication keys that are stored on the key management servers:
security
key-manager query
◦
If the
Key Manager type displays external and the Restored column displays yes, it’s safe to shut
down the impaired node.
◦
If the
Key Manager type displays onboard and the Restored column displays yes, you need to
complete some additional steps.
◦
If the
Key Manager type displays external and the Restored column displays anything other than
yes, you need to complete some additional steps.
◦
If the
Key Manager type displays external and the Restored column displays anything other than
yes, you need to complete some additional steps.
2.
If the
Key Manager type displays onboard and the Restored column displays yes, manually backup
the OKM information:
a.
Go to advanced privilege mode and enter
y when prompted to continue: set -priv advanced
b.
Enter the command to display the key management information:
security key-manager onboard
show-backup
c. Copy the contents of the backup information to a separate file or your log file. You’ll need it in disaster
scenarios where you might need to manually recover OKM.
13

NetApp FAS8300 Specifications

General

Controller	Dual
Maximum Drives	1440
Form Factor	4U
NVMe Flash Cache	Supported
Operating System	ONTAP
High Availability	Yes
Drive Types	SSD, HDD, NVMe
Connectivity	10GbE, 25GbE, 40GbE, 100GbE, FC
Protocols	NFS, CIFS, iSCSI, FC, FCoE
Processor	Intel Xeon
Data Reduction	Yes (compression, deduplication, compaction)
Flash Cache	Supported