NetGain Motors HyPer 9 IS User Manual

HyPer 9 IS User Manual Revision 06 NetGain Motors, Inc. Page 18 of 27
Controller Specifications
Controller Communication
• RS-232
• Lin Bus
• CAN:
o Protocol: CAN Open
o Physical layer: ISO11898-2
o Baud rates: 1Mbps, 800kbps, 500kbps, 250kbps, 125kbps, 50kbps
Controller EMC
• EN12895 (Industrial Trucks – Electromagnetic Compatibility)
Controller Safety Certification
• EN1175-1 (Safety of Industrial Trucks – Electrical Requirements)
The vehicle Owner takes full responsibility of the regulatory compliance of the vehicle system with the
controller installed.
Controller Operating Environment Specifications
• Storage ambient temperature range: -40°C to +70°C
• Operating ambient temperature range: -40°C to +55°C
• Heatsink operating temperature range: -40°C to +95°C
o With linear derating: +80°C to +95°C
• Protection Level: IP65
• Vibration: Tested under conditions suggested by EN60068-2-6 [5g, 10÷500Hz, 3 axes]
• Shock & Bump: Tested under conditions suggested by EN60068-2-27
• Cold & Heat: Tested under conditions suggested by EN60068-2-1
• Mechanical size: 210 x 160 x 85 [mm] • Weight: 3.5 kg

NetGain Motors HyPer 9 IS Specifications

General

Brand	NetGain Motors
Model	HyPer 9 IS
Category	Engine
Language	English