NetGain Motors HyPer 9 IS User Manual

HyPer 9 IS User Manual Revision 06 NetGain Motors, Inc. Page 27 of 27
99
Commission End Errors
Spin sensor commission end with errors
Stopping
100
Internal Software Fault 1
Internal Error.
Blocking
101
Internal Software Fault 2
Internal Error.
Warning
102
Internal Software Fault 3
Internal Error.
Warning
103
Internal Hardware Fault
1
Internal Error.
Blocking
104
Internal Hardware Fault
2
Internal Error.
Blocking
105
Internal Hardware Fault
3
Internal Error.
Blocking
106
Internal Hardware Fault
4
Internal Error.
Blocking
107
Internal Software Fault 4
Internal Error.
Blocking
Additional Support
If you need additional support to solve Diagnostic Codes signaled by the firmware or strange behaviors of
the vehicle, please contact your Authorized Dealer.
In order to make the collection of information faster, you must provide them:
1. Product Code of the Controller.
2. Clone file of the Controller.
3. Screenshots of the About Page in the Main Menu.
4. Screenshots of the Active Faults Tab in DIAGNOSE
5. Screenshots of the Faults History Tab in DIAGNOSE
6. Screenshots of the Time/Distance Tab in MONITOR

NetGain Motors HyPer 9 IS Specifications

General

Brand	NetGain Motors
Model	HyPer 9 IS
Category	Engine
Language	English