Need help?Do you have a question about the NetGain Motors HyPer 9HV IS and is the answer not in the manual?
Essential safety guidelines for operating and maintaining the equipment.
Instructions to download the Smartview system software.
Instructions for downloading the latest controller firmware.
Process for configuring the throttle input.
Process for configuring brake regeneration settings.
General| Peak Torque | 235 Nm (173 lb-ft) |
|---|---|
| Motor Type | AC Induction |
| Type | Electric Motor |
| Peak Power | 120 kW (160 HP) |
| Peak Horsepower | 160 HP |
| Maximum RPM | 8, 000 RPM |
To Next Page
