NetGain Motors HyPer 9HV IS User Manual

HyPer 9HV IS User Manual Version 06 NetGain Motors, Inc. Page 19 of 28
X144 controller Temperature Derating
To ensure proper protection from overheating, the controller is programmed to derate power based on its
heatsink temperature. Additional cooling methods, such as Liquid Cooling, may be required if your controller
is overheating under normal operation.
Operating ambient temperature range: -40°C to +55°C
Linear power derating: +80°C (100% current) to +95°C (50% current)
Thermal shut down: +95°C

NetGain Motors HyPer 9HV IS Specifications

General

Brand	NetGain Motors
Model	HyPer 9HV IS
Category	Engine
Language	English