Need help?Do you have a question about the NetGain Motors HyPer 9 IS and is the answer not in the manual?
Key safety precautions and warnings for operating electric motors and controllers.
Pinout details for the motor encoder connector.
Pinout details for the motor thermistor connector.
Wiring connections for the main contactor, coil driver, and key switch.
Pinout for the compact display's mating female connector.
Instructions for downloading the SME SmarView Sys software.
Instructions for downloading the latest controller firmware.
Instructions for downloading the HyPer 9 clone file.
Step-by-step guide for initial system setup and operation.
Procedure for calibrating the throttle pedal input.
Procedure for configuring the brake regeneration settings.
Explanation of profiles for regenerative braking in neutral.
Details on controller communication protocols.
Electromagnetic compatibility standards for the controller.
Safety certifications applicable to the controller.
Environmental conditions for controller operation and storage.
Overview of the controller's digital and analog I/O signals.
Detailed table of controller I/O pin assignments and specifications.
General| Brand | NetGain Motors |
|---|---|
| Model | HyPer 9 IS |
| Category | Engine |
| Language | English |
To Next Page
