HyPer 9HV IS User Manual Version 06
NetGain Motors, Inc.
Page 5 of 28
Motors should NEVER be run without a load. Running a motor without a load could result in harm to
people or the motor. Absence of a load is considered misuse and could prove dangerous to anyone in the
vicinity and void the motor warranty.
Portions of the motor or controller may become hot and proper precautions must be taken.
Motors and controllers should never be operated beyond the limits established by the manufacturer.
Motors and controllers must not be modified in any manner; doing so will void warranty and could prove
extremely dangerous.
Motors are heavy and are likely to become damaged if dropped, or cause damage to anything they fall
upon (including people and body parts). Use extreme caution when working with motors!
Motors contain moving parts that could cause severe injury if the proper precautions are not taken.
Never touch an operating motor.
Do not defeat any safety circuits or safety devices.
Under no circumstances should you push in any contactor of an electric vehicle while the drive wheels are
in contact with the floor. Pushing in a contactor when the drive wheels are in contact with the floor can
cause serious property damage, personal injury or death.
DISCLAIMER:
NetGain Motors, Inc. has no control of third party installation procedure or the use of this motor and control
system. Accordingly NetGain Motors, Inc. assumes no liability for vehicle functionality or safety durring or after
third party installation of the motor and controller. It is the responsibility of the vehicle designer and component
installer to test and qualify their application and ensure proper safety and functionality. NetGain Motors, Inc
assumes no responsibility for this product in any use.
To Next Page
Loading...
Need help?
General
