NETGEAR AirCard 785S

Use Your Mobile Hotspot
34
AirCard 785S Mobile Hotspot
Recharge the Battery
The battery comes partially charged. You can recharge the battery from a wall socket or from
the USB port on your computer. Recharging from a wall socket is faster than recharging from
a USB port.
 To recharge the battery from a wall socket:
1. Attach one end of the micro USB cable to the mobile hotspot and attach the other end
to the wall charger (included).
2. Plug the wall charger into a wall socket.
The battery icon includes a lightning bolt to indicate that the battery is charging (
).
The battery icon on the LCD screen indicates when the battery is fully charged (
)
and a notification displays.
Note: The LCD screen goes into sleep mode after a set time to extend battery
life. To wake up the LCD screen, press and quickly release the Power
button.
 To recharge the battery from the USB port on your computer:
1. Attach one end of the micro USB cable to the mobile hotspot and plug the other end into
the USB port on your computer
.
The battery icon includes a lightning bolt to indicate that the battery is charging (
).