Enable or disable WiFi 6
You can enable WiFi 6 on the extender, which enables WiFi 6 features such as Orthogonal
Frequency-Division Multiple-Access (OFDMA) and 1024 QAM.
To enable or disable WiFi 6:
1.
Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
•
If you did not enable the One WiFi Name feature, enter
http://www.mywifiext.net/ in the address field of the browser.
•
If you enabled the One WiFi Name feature, enter one of the following URLs:
-
Windows-based computers. http://mywifiext/ or http://mywifiext.local/
-
Mac computers, iOS devices, and Linux devices. http://mywifiext.local/
-
Android devices. http://<extender’s IP address>/ (for example,
http://192.168.1.3/)
For more information about how to find your extender’s IP address, see Find
the Extender’s IP address on page 65.
A login page displays.
3. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
4.
If your browser displays the Menu icon , click it.
The extender menu displays.
5. Select Settings > Wireless.
The WiFi Settings page displays.
6. Enable or Disable WiFi 6:
•
Enable the WiFi 6. To enable WiFi 6, select the Yes radio button.
•
Disable the WiFi 6. To disable WiFi 6, select the No radio button.
7. Click the SAVE button.
Your settings are saved.
User Manual27Extender Network Settings
AX1800 4-Stream WiFi 6 Mesh Extender
To Next Page
Loading...
Need help?
General
