Need help?Do you have a question about the NETGEAR EAX14 and is the answer not in the manual?
Operating Environment| operating temperature | 32° to 104°F (0° to 40°C) |
|---|---|
| operating humidity | 90% maximum relative humidity, noncondensing |
Ports & interfaces| ethernet port speed | 10/100/1000 Mbps |
|---|---|
| wireless standards | 802.11a/b/g/n/ac/ax and 802.11k |
Weight and Dimensions| dimensions | 5.9 x 2.7 x 2.1 in (149.86 x 68.58 x 53.34 mm) |
|---|---|
| weight | 0.49 lb (222 g) |
Instructions for unpacking the extender from its packaging.
Details the function and status of the extender's indicator lights.
Lists the necessary hardware and software for installation and operation.
Explains the operational principles of the WiFi range extender.
Step-by-step guide for installing the WiFi extender for the first time.
Procedures for connecting the extender to your primary WiFi network.
Using the NETGEAR Nighthawk mobile app for extender setup and connection.
Connecting the extender to your WiFi network using Wi-Fi Protected Setup (WPS).
Utilizing the web browser-based assistant for initial extender setup.
Configuring the extender to function as a WiFi access point via Ethernet.
A guided process to configure extender settings and network connections.
Controls whether the extender uses the same WiFi name as the router.
Manages the feature that automatically selects the best WiFi band for devices.
Customizing the SSID for the extender's WiFi networks.
Creating a separate WiFi network for visitors with limited access.
Connecting devices to the extender using the WPS button or PIN method.
Restricting network access for specific devices using MAC address filtering.
Scheduling periods for enabling or disabling network access for users.
Manually configuring a fixed IP address for the extender.
Modifying the extender's output power to control WiFi range.
Optimizing performance by dedicating WiFi bands for router and device connections.
Procedures for updating the admin credentials used to access the extender.
Steps to retrieve lost login credentials using security questions.
Resetting the extender to its original configuration and settings.
Factory resetting the extender using the physical reset button.
Performing a factory reset via the extender's web interface.
Checking for and installing the latest firmware for the extender.
Rebooting the extender through its web-based management interface.
Controlling the visibility of the extender's status indicator LEDs.
Common questions and answers regarding extender setup and operation.
Methods to locate the extender's IP address on the network.
Troubleshooting steps for issues preventing connection to the extender.
Solutions for problems encountered when trying to access the extender's web interface.
A table detailing the extender's default configuration parameters.
Information on the extender's hardware capabilities and operating conditions.
To Next Page
