1-1
v1.0, February 2008
Chapter 1
Installing the Gateway
This chapter describes how to set up the wireless voice gateway on your local area network
(LAN), connect to the Internet, and perform basic configuration.
The Gateway Front Panel
The front panel of the Voice Gateway contains status LEDs.
You can use the LEDs to verify connections. The following table lists and describes each LED on
the front panel of the Voice Gateway.
Figure 1-1
Table 1-1. LED Descriptions
LED Description
Power • Green solid: Power is supplied to the gateway.
• Off: Power is not supplied to the gateway.
Online • Amber blink: Synchronization.
• Green solid: Cable link.
• Off: No configuration.
To Next Page
Loading...
