5
c. Wait for the WiFi LED to light blue.
If the WiFi LED does not light, press the WiFi On/Off
button
.
3. Check the DSL LED.
If the modem router is connected to a DSL service, the DSL
LED
lights green.
4. Connect a computer.
You can use an Ethernet cable or connect with WiFi:
• For a wired connection, use the Ethernet cable that came
with the modem router to connect your computer to an
Ethernet port on your modem router.
• To connect with WiFi, use the WiFi settings on the product
label.
Note: If the computer is set to a static or fixed IP address (this
setting is uncommon), either change the computer to obtain an
IP address automatically from the modem router through DHCP,
or change the IP address of the computer to a static or fixed IP
address in the 192.168.0.2–192.168.0.254 range.
Modem router
Cable or fiber modem
Ethernet cable
(not included)
Power
adapter
ADSL or VDSL
Internet
DSL splitter
Cable or fiber
Internet
Phone cable
Ethernet
cable
To Next Page
Loading...
