Need help?Do you have a question about the NETGEAR DS104 and is the answer not in the manual?
Key features of the DS100 Series hubs, including autosensing and Plug-and-Play.
Details on the front-panel LEDs for monitoring individual ports and hub status.
Describes the rear panels of the DS100 Series hubs, including ground clip and power receptacle.
Site preparation requirements including temperature, humidity, ventilation, and power.
Instructions for installing the hub on a flat surface or on a wall.
Explains the function of the Normal/Uplink push button for port selection and cable usage.
Symptom, cause, and solution table for common network hub installation issues.
To Next Page
General