Need help?Do you have a question about the NETGEAR EX5000 and is the answer not in the manual?
General| WiFi Technology | 802.11ac |
|---|---|
| WiFi Performance | AC1200 |
| Coverage | Up to 1500 sq. ft. |
| Device Connections | Up to 25 devices |
| Antenna | Internal |
| Button | WPS Button |
| WiFi Band | Dual-band |
| Number of Ethernet Ports | 1 |
| Security | WPA/WPA2 |
| Compatibility | Works with any WiFi router |
| LED Indicators | Power |
Introduces the WiFi Range Extender hardware, including LEDs and buttons.
Describes the function of each LED indicator on the extender.
Details the purpose and function of the extender's physical buttons.
Guidance on optimal placement and scenarios for using the WiFi Range Extender.
Explains the operational principles of the WiFi Range Extender as a network bridge.
Step-by-step guide to installing the WiFi Range Extender.
Instructions for physically positioning and powering on the extender unit.
Methods for connecting the extender to your primary WiFi network.
Using Wi-Fi Protected Setup (WPS) to connect the extender to your router.
Using the web-based assistant for guided extender setup.
Tips for determining the optimal placement for extender performance.
How to access the extender's web interface after initial setup.
Using the Smart Setup feature to configure extender settings.
Procedure for modifying the administrator login credentials for the extender.
Enabling or disabling password protection for the extender's interface.
Steps to retrieve lost administrator credentials using security questions.
Configuring the extender to automatically adjust for daylight saving time.
Manually setting the internal clock of the extender for accurate scheduling.
How to save and restore the extender's configuration settings.
Creating a backup file of the current extender configuration.
Loading a previously saved configuration file onto the extender.
Resetting the extender to its original factory default configuration.
Using the physical reset button to restore factory default settings.
Resetting the extender to factory defaults via the web interface.
Procedures for updating the extender's firmware.
Manually checking for and installing new firmware versions.
Uploading a firmware file manually to the extender.
Displaying a list of devices currently connected to the extender.
Optimizing streaming performance using FastLane technology.
Viewing current WiFi configuration details of the extender.
Procedure for changing the SSID of the extender's WiFi network.
Disabling the broadcast of the extender's network name for security.
Controlling the 2.4 GHz and 5 GHz WiFi radio transmissions.
Adjusting the WiFi speed settings for the extender's network.
Connecting devices to the extender's network using WPS.
Connecting devices via WPS using the physical or onscreen push button.
Connecting devices via WPS using a PIN code.
Restricting network access for specific devices using MAC filtering.
Creating a schedule to control Internet access through the extender.
Renaming the extender's device for easier identification.
Configuring a fixed IP address for the extender.
Implementing MAC filtering for network access control on the extender.
Answers to frequently asked questions regarding extender setup and operation.
Troubleshooting steps for issues preventing connection to the extender.
Resolving problems when the extender cannot connect to a WiFi network.
Troubleshooting access issues with the extender's setup web address.
Methods to locate the extender's IP address for direct access.
Details of the default settings applied to the extender upon factory reset.
Information on the extender's physical dimensions, operating conditions, and protocols.
To Next Page
