NETGEAR EX5000 User Manual

Factory Default Settings
To reset the extender to factory default settings, you can use the Reset button on the
side panel or you can log in and click the onscreen RESET button. For more information,
see Return the Extender To Its Factory Default Settings on page 22.
The following table shows the factory default settings.
Table 2. Factory default settings
Default SettingsFeature
EnabledSmart Setup
EnabledWiFi communication
NETGEAR_EXTWiFi network name (SSID)
DisabledSecurity
Auto
1
Transmission speed
Varies by regionCountry/region
802.11a/b/g/n/acOperating mode
54/145/300 MbpsData rate in the 2.4 GHz band
54/145/300/433/867 MbpsData rate in the 5 GHz band
Client enabledDHCP
1
Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead lower actual
data throughput rate.
Technical and Environmental Specifications
The following table shows the technical and environmental specifications.
User Manual47Factory Settings and Technical
Specifications
AC1200 WiFi Range Extender

NETGEAR EX5000 Specifications

General

Brand	NETGEAR
Model	EX5000
Category	Extender
Language	English