Wireless 6-1
Chapter 6
Wireless
This chapter describes how to configure the Wireless networking features of your FR114W
Wireless-Ready Firewall or FM114P Wireless Firewall with Print Server. This chapter does not
apply to the FR114P Firewall with Print Server.
The FR114W Wireless-Ready Firewall can be upgraded to wireless operation by purchasing and
installing a NETGEAR Model MA401 802.11b Wireless PC Card. For instructions on upgrading
the FR114W, refer to “Installing a Wireless Card in the FR114W“ on page 2-6.
Note: If you are configuring the firewall from a wireless PC and you change the
firewall’s SSID, channel, or WEP settings, you will lose your wireless connection when
you click on Apply. You must then change the wireless settings of your PC to match the
firewall’s new settings.
To Next Page
Loading...
