Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
7-4 Print Server
Use Start -> Settings -> Printers to open the Printers folder, then right-click the Printer and select
Properties. The Port Settings button is on either the Details or Port tab, depending on your version
of Windows. An example screen is shown below:
Items shown on this screen are as follows:
•Port
If desired, click Browse to select a different device. The ‘Select Device Port’ button supports
multi-port models, but the firewall is a single-port print server. The Port Name is shown in the
Printer's Properties.
• Banner
Check this option to print a banner page before each print job. The User Name will be printed
on the banner page. If using a PostScript Printer, check the PostScript box.
• Retry Interval
Determines how often Windows will poll the print server to establish a connection when the
printer is busy.
LPD/LPR Printing from Windows
LPD/LPR printing is supported by Windows NT 4.0 Server and Windows 2000/XP. No software
needs to be installed on the client PCs. Third-party drivers are available for earlier versions of
Windows.
To Next Page
Loading...
