Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
Print Server 7-11
a. Open Start -> Settings -> Control Panel -> Add/Remove Programs.
b. Look for an entry with a name like “NETGEAR ProSafe Firewall Router”, “NETGEAR
Print Server”, "Print Server Driver" or "Print Server Port".
c. Select this item, click Add/Remove, and confirm the deletion.
I am using Windows 95. The Printer Driver installed and ran, but when I selected a port and
clicked Add, the printer was not installed.
Try installing the printer using the standard Windows tools, as follows:
a. From Start -> Settings, open the Printers folder, and start the Add Printer Wizard.
b. When prompted, select Network Printer and click Next.
c. For Network Path or Queue, enter a dummy value such as \\123, as shown below.
Select NO for "Do you print for MS-DOS programs?".
d. The printer wizard will display a message stating that "The Network Printer is off-line".
This is OK. Continue the Add Printer Wizard until finished.
e. When finished, go to Start -> Settings -> Printers. The new printer icon will be grayed out
indicating the printer is not ready.
To Next Page
Loading...
