• Help is there when you need it!
NETGEAR provides 24x7 telephone
and e-mail technical support** in
English, with selected local language
support during office hours.
High Port Density with Layer 2 Management
Flexibility
NETGEAR’s non-blocking FSM726S is a Layer 2 managed switch that’s intuitive enough for new
users but powerful enough for experienced professionals. With the utility of 24 10/100 ports,
two rear stacking ports, and two Gigabit Ethernet ports – using either built-in copper or GBIC
slots – small and growing business networks can accommodate as many as 250 users and utilize
up to 12 Gigabit Ethernet ports. Built-in stacking ports provide simple, cost-effective stacking –
no optional modules required. The FSM726S stacks up to six units, and comes with the stacking
cable. The versatile FSM726S offers two management interface options: an easy-to-use, browser
based interface and a command line interface. Easy to buy, set up and use, the FSM726S is a
compelling value.
Ideal for a growing office that wants superior performance with options for expansion and gigabit
connections. Can be combined with additional FSM726S and FSM750S switches using dedicated
stacking ports.
This non-blocking switch provides high-performance data transfer via 24 10/100 ports, two built-in
front gigabit uplinks, and two rear stacking ports that you can use to stack up to 144 ports and 12
gigabit ports.
Meet your management needs with SNMP, RMON, DHCP, and BootP. Advanced features include
VLAN, DiffServ traffic prioritization 802.1p (QoS), RADIUS, 802.1x, port trunking, Spanning Tree,
and port mirroring.
Use and stack the FSM726S as an unmanaged switch – you can save the management features until
you're ready to use them. All ports are auto-negotiating and support Auto Uplink
™
technology.
The FSM726S comes packaged with stacking ports, gigabit uplinks, a stacking cable and a rack-
mounting kit.
To Next Page
Need help?
General