4500 Great America Parkway
Santa Clara, CA 95054 USA
Phone: 1-888-NETGEAR
E-mail: info@NETGEAR.com
www.NETGEAR.com
©2003 NETGEAR, Inc. NETGEAR
®
, the Netgear
logo, The Gear Guy, Everybody's connecting
and Auto Uplink are trademarks or registered
trademarks of NETGEAR, Inc. in the United
States and/or other countries. Other brand and
product names are trademarks or registered
trademarks of their respective holders.
Information is subject to change without notice.
All rights reserved.
** Free basic installation support provided
for 90 days from date of purchase; optional
premium support available.
D-FSM726S-2
Technical Specifications
• Network Protocol and Standards Compatibility:
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3x Flow Control
• LEDs:
- Per port (10/100 and Gigabit): Link, Speed,
Duplex, Activity, Collision
- Per device: Power, Stack In, Stack Out, Master
• Physical Interfaces:
- 24 RJ-45 connector for 10BASE-T and 100BASE-
TX (Auto Uplink
™
on all ports)
- Two RJ-45 connectors for 10BASE-T, 100BASE-
TX, and 1000BASE-T (Auto Uplink on all ports)
- Two Gigiabit Interface Converter (GBIC) slots for
GBIC modules
- RS-232 Console Port
- Rear Stacking Connectors
• Performance Specifications:
- Forwarding modes: Store-and-forward
- Bandwidth: 12.8 Gbps (non-blocking)
- Packet forwarding: 9.5 Mpps
- Network latency: < 80 µs for 64-byte frames (100
Mbps to 100 Mbps)
- Packet buffer memory: 1.2 MB
- Addressing: 48-bit MAC address
- Address database size: 8,000 media access control
(MAC) addresses per system
- Acoustic noise: (ANSI-S10.12) 48 dB
- Heat dissipation: 18.99 BTU/hr
- Mean Time Between Failure (MTBF): 58,300
(~6.5 years)
• Management Specifications:
- IEEE 802.1x Standard for Port Based Network
Access Control*
- IEEE 802.1Q Static VLAN (Up to 64)
- IEEE 802.1p Class of Service (CoS)
- IEEE 802.1D Spanning Tree Protocol
- Port Trunking - Manual as per IEEE802.3ad
Link Aggregation
- IGMP Snooping Support
- Port Mirroring Support
- RFC 1157 SNMP
- RFC 1757 RMON groups 1, 2, 3, and 9
- RFC 1213 MIB II
- RFC 1643 Ethernet Interface MIB
- RFC 1493 Bridge MIB
- RFC 951 BootP
- RFC 2131 DHCP
- RFC 2998 DiffServ
- RFC 2865 RADIUS
- Private Enterprise MIB
• User Interfaces:
- Command Menu Interface via console port
- Web-based management via embedded HTTP server
- Telnet remote login
• Electrical Specifications:
- Power consumption: 36W maximum
- Voltage: 100 - 127/200 - 240 VAC, 50-60 Hz
• Physical Specifications:
- Dimensions: 440 x 205 x 43 mm (17.3" x 8.1" x 1.6")
- Weight: 3.2 kg (7.0 lbs)
• Environmental Specifications:
- Operating temperature: 0° to 40°C (32° to 104° F)
- Storage temperature: -20° to 70°C (-4° to 158° F)
- Operating humidity: 90% maximum relative
humidity, noncondensing
- Storage humidity: 95% maximum relative humidity,
noncondensing
- Operating altitude: 3,000 m (10,000 ft) maximum
- Storage altitude: 3,000 m (10,000 ft) maximum
• Safety:
- CE mark, commercial
- CSA certified (CSA 22.2 #950)
- TUV licensed (EN 60 950)
- UL listed (UL 1950)/cUL IEC950/EN60950
• Emissions:
- CE mark, commercial
- FCC Part 15 Class A
- VCCI Class A
- EN 55022 (CISPR 22), Class A EN 50082-1
- C-Tick
• Electromagnetic Immunity:
- EN 50082-1
- EN 55024
• Warranty:
- NETGEAR 5-year warranty
Package Contents
- FSM726S Managed Stackable Switch
- Null modem cable
- Stackable cable
- Rubber footpads for tabletop installation
- Power cord
- Rack-mount kit
- User’s guide
- Support information card
- Warranty card
NETGEAR Related Products
- FSM750S 48+2 Managed Stackable Switch
- FSM726 24+2 Managed Switch
- GSM712 Managed Gigabit Switch
- AGM721F 1000Base-SX GBIC module
(SC connector)
* available via a free download from the Netgear web site in July 2003
FSM726S 24-port 10/100 Mbps Managed Stackable Switch with Gigabit Ports
To Previous Page
Loading...
Need help?
General