ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Introduction 1-5
v1.0, October 2007
• VPN Wizard. The VPN firewall includes the NETGEAR VPN Wizard to easily configure
IPsec VPN tunnels according to the recommendations of the Virtual Private Network
Consortium (VPNC) to ensure the IPsec VPN tunnels are interoperable with other VPNC-
compliant VPN routers and clients.
• SNMP. The VPN firewall supports the Simple Network Management Protocol (SNMP) to let
you monitor and manage log resources from an SNMP-compliant system manager. The SNMP
system configuration lets you change the system variables for MIB2.
• Diagnostic Functions. The firewall incorporates built-in diagnostic functions such as Ping,
Trace Route, DNS lookup, and remote reboot.
• Remote Management. The firewall allows you to login to the Web Management Interface
from a remote location on the Internet. For security, you can limit remote management access
to a specified remote IP address or range of addresses.
• Visual monitoring. The VPN firewall’s front panel LEDs provide an easy way to monitor its
status and activity.
Maintenance and Support
NETGEAR offers the following features to help you maximize your use of the VPN firewall:
• Flash memory for firmware upgrade.
• Free technical support seven days a week, 24 hours a day, according to the terms identified in
the Warranty and Support information card provided with your product.
Package Contents
The product package should contain the following items:
• ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN.
• One AC power cable.
• Rubber feet.
• One Category 5 (Cat5) Ethernet cable.
• Installation Guide, FVS336G ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN.
• Resource CD, including:
– Application Notes and other helpful information.
To Next Page
Loading...
Need help?
General
