NETGEAR FVS336G User Manual

ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
1-8 Introduction
v1.0, October 2007
3. WAN Ethernet ports.
Two independent N-way automatic speed negotiating, Auto MDI/MDIX, Gigabit Ethernet
ports with RJ-45 connectors.
4. Cable security lock receptacle.
5. AC power receptacle.
Universal AC input (100-240 VAC, 50-60 Hz).
6. On/off power switch.
Default IP Address, Login Name, and Password Location
Check the label on the bottom of the FVS336G’s enclosure if you need a reminder of the following
factory default information:
Qualified Web Browsers
To configure the ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN, an administrator
must use Internet Explorer 5.1 or higher, Apple Safari 1.2 or higher, or Mozilla Firefox l.x Web
browser with JavaScript, cookies, and SSL enabled.
Although these web browsers are qualified for use with the VPN firewall’s Web Management
Interface for configuring the VPN firewall, SSL VPN users should choose a browser that supports
Figure 1-3
IP Address
User Name
Password

NETGEAR FVS336G Specifications

General

Model	FVS336G
Category	Firewall
WAN Ports	2
VPN Support	Yes
SPI Firewall	Yes
QoS	Yes
Max VPN Tunnels	25
Encryption	3DES, AES
Protocols	IPSec, PPTP
Authentication	SHA-1, MD5
Dimensions	9.5 x 6.5 x 1.7 inches
Weight	1.5 kg (3.3 lb)