EasyManuals Logo

NETGEAR HA501 User Manual

NETGEAR HA501
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
CHAPTER 3: HARDWARE INSTALLATION
Package Contents
The product package should contain:
HA501 802.11a Wireless Adapter
HA501 Wireless Adapter Resource CD-ROM
HA501 Installation Guide
Support Information Card
Warranty and registration card
Please call your reseller or customer support in your area if there are any wrong, missing, or damaged parts. You
can refer to the Support Information Card for the telephone number of customer support in your area. You should
keep the Support Information Card, along with the original packing materials, and use the packing materials to
repack the HA501 Wireless Adapter if you need to return it for repair.
To qualify for product updates and product warranty registrations, register online on the NETGEAR Web page at:
http://www.NETGEAR.com.
Hardware Description
The HA501 Wireless Adapter has two interfaces: a 32-bit 68-Pin CardBus connector that connects to any notebook
PC with an available CardBus slot, and a wireless interface that remains outside of the notebook PC chassis when
the Wireless Adapter is inserted into a notebook. There are two green LEDs, Network and Power, that indicate the
wireless link condition of the HA501 Wireless Adapter with another wireless node or the associated access point.
Wireless Adapter Installation
The HA501 802.11a Wireless Adapter is hot swappable, which means that you can insert it into a notebook PC that
is either powered on or shut down. You may insert the HA501 Wireless Adapter into any available CardBus slot at
any time. Some notebook computers have two CardBus slots; the HA501 Wireless Adapter can be inserted into
either slot. Since the HA501 Wireless Adapter transmits and receives radio frequency signals through its antenna,
there is no cable needed in the installation.

Other manuals for NETGEAR HA501

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR HA501 and is the answer not in the manual?

NETGEAR HA501 Specifications

General IconGeneral
Radio Data Rate6, 9, 12, 18, 24, 36, 48, 54, 72 for Turbo mode (Auto rate capable)
Frequency5.15 ~ 5.25 GHz (lower band) for US/Canada, Japan 5.25 ~ 5.35 GHz (middle band) for US/Canada
Range: @ 6 Mbps @ 54 MbpsOutdoor environment Indoor environment 1200 ft. 300 ft. 100 ft. 60 ft.
Encryption40-bit (also called 64-bit), 128-bit or 152-bit WEP data encryption
Maximum computers per networkLimited by the amount of wireless network traffic generated by each node; typically 30 to 70 nodes.
Bus interfacePCMCIA type II PC Card
Provided driversMicrosoft Windows 98, NT 4.0, 2000, Millennium, XP
Status LEDsPower/Network
Electromagnetic ComplianceFCC Part 15 Class B and Class E
Environmental SpecificationsOperating temperature: 0 to 60° C Operating humidity: 5-95%, noncondensing
WarrantyLimited 5-year warranty
Weight and Dimensions IconWeight and Dimensions
DimensionsW: 88 mm (3.4 in) D: 54 mm (2.1 in) H: 5 mm (0.2 in)
Weight43.4 g (1.6 oz)

Related product manuals