EasyManuals Logo

NETGEAR Nighthawk AC2600 User Manual

NETGEAR Nighthawk AC2600
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #155 background imageLoading...
Page #155 background image
Typically, your ISP provides the addresses of one or two DNS servers for your use.
If you entered a DNS address during the router’s configuration, restart your computer.
Alternatively, you can configure your computer manually with a DNS address, as
explained in the documentation for your computer.
The router might not be configured as the default gateway on your computer.
Restart the computer and verify that the router address (www.routerlogin.net) is
listed by your computer as the default gateway address.
You might be running login software that is no longer needed. If your ISP provided
a program to log you in to the Internet (such as WinPoET), you no longer need to
run that software after installing your router. You might need to go to Internet Explorer
and select Tools > Internet Options, click the Connections tab, and select the
Never dial a connection. Other browsers provide similar options.
Changes Are Not Saved
If the router does not save the changes that you make in the router web interface, do
the following:
When entering configuration settings, always click the Apply button before moving
to another page or tab, or your changes are lost.
Click the Refresh or Reload button in the web browser. It is possible that the changes
occurred, but the old settings might be in the web browser’s cache.
Troubleshoot WiFi Connectivity
If you are experiencing trouble connecting over WiFi to the router, try to isolate the
problem:
Does the WiFi device or computer that you are using find your WiFi network?
If not, check the WiFi LED on the router. If it is off, you can press the WiFi On/Off
button on the router to turn the router WiFi radios back on.
If you disabled the router’s SSID broadcast, then your WiFi network is hidden and
does not display in your WiFi client’s scanning list. (By default, SSID broadcast is
enabled.)
Does your WiFi device support the security that you are using for your WiFi network
(WPA, WPA2, or WPA3)?
If you want to view the WiFi settings for the router, use an Ethernet cable to connect
a computer to a LAN port on the router. Then log in to the router, and select BASIC
> Wireless.
User Manual155Troubleshooting
Nighthawk AC2600 Smart WiFi Router Model AC2600

Table of Contents

Other manuals for NETGEAR Nighthawk AC2600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk AC2600 and is the answer not in the manual?

NETGEAR Nighthawk AC2600 Specifications

General IconGeneral
WiFi RangeVery large homes
Antennas4 external antennas
BeamformingYes
MU-MIMOYes
Memory128MB Flash and 512MB RAM
WiFi Technology802.11ac
WiFi PerformanceAC2600 (800 + 1733 Mbps)
ProcessorDual Core 1.7GHz
Ethernet Ports5 x 10/100/1000 Mbps Gigabit Ethernet ports
SecurityWPA2

Related product manuals