Speedtest determines your Internet bandwidth.
8.
Click the Apply button.
Your settings are saved.
A link displays on the bottom of the page to view bandwidth utilization. Clicking the
link displays the Attached Devices page. For more information, see View Devices
Currently on the Network on page 97.
Add a QoS Rule by Device
To enable Dynamic QoS:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > QoS Setup.
The QoS Setup page displays.
5.
Select the Turn Internet Access QoS On check box.
6.
Select the QoS by Device radio button.
Computers and devices that are connected to the network display in the MAC Device
List. By default, each device is assigned a normal priority.
7.
Select or specify the device:
•
To select a device in the MAC Device List, select its radio button.
• To specify a device that is not in the MAC Device List, complete the QoS Policy
for, MAC Address, and Device Name fields and click the Add button.
The device is listed in a queue in the QoS rules table with its default rule priority.
The rule priority corresponds to the queues.
8.
Click the Apply button.
Your settings are saved.
User Manual82Optimize Performance
Nighthawk AC2600 Smart WiFi Router Model AC2600
To Next Page
Loading...
Need help?
General
