NETGEAR Nighthawk AC2600 User Manual

Add a QoS Rule by Service
To enable Dynamic QoS:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > QoS Setup.
The QoS Setup page displays.
5.
Select the Turn Internet Access QoS On check box.
6.
Select the QoS by Service radio button.
The page adjusts.
7.
From the Applications menu, select an application or service.
8.
From the Priority menu, select the priority for the rule.
The priority selections correspond to the queues in the QoS rules table.
9.
Click the Add button.
The service displays in the QoS rules table.
10.
Click the Apply button.
Your settings are saved.
Edit a QoS Rule
You can change an existing default or custom QoS rule. For default rules, you can change
only the priority. For custom rules, you can change the priority and other settings.
To edit a QoS rule:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
User Manual83Optimize Performance
Nighthawk AC2600 Smart WiFi Router Model AC2600

NETGEAR Nighthawk AC2600 Specifications

General

WiFi Range	Very large homes
Antennas	4 external antennas
Beamforming	Yes
MU-MIMO	Yes
Memory	128MB Flash and 512MB RAM
WiFi Technology	802.11ac
WiFi Performance	AC2600 (800 + 1733 Mbps)
Processor	Dual Core 1.7GHz
Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports
Security	WPA2