The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
5.
Select ADVANCED > Advanced Setup > Router/ AP / Bridge Mode.
The Router / AP / Bridge Mode page displays.
6.
Select Bridge Mode.
The page adjusts.
7.
Click the setup bridge mode wireless settings button.
The Wireless Settings window opens.
8.
Specify the settings of the other router to which this router will connect:
a.
Select the wireless network frequency (2.4 GHz or 5 GHz).
For 802.11ac mode, select 5 GHz.
b.
In the Name (SSID) file, enter the wireless network name (SSID).
c. In the Security Options section, select a radio button.
d.
If prompted, type the WiFi password (network key) that you use to connect
wirelessly to the other router.
9.
Click the Apply button.
The settings for the other router are saved and the Advanced Wireless Settings page
displays.
10.
Click the Apply button on the Router / AP / Bridge Mode page.
Your settings are saved.
Set Up a Bridge for a Port Group or VLAN
Tag Group
Some devices, such as an IPTV, cannot function behind the router’s network address
translation (NAT) service or firewall. Based on what your Internet service provider (ISP)
requires, for the device to connect to the ISP’s network directly, you can enable the
bridge between the device and the router’s Internet port or add new VLAN tag groups
to the bridge.
User Manual72Manage Network Settings
Nighthawk AC2600 Smart WiFi Router Model AC2600
To Next Page
Loading...
Need help?
General
