NETGEAR Nighthawk AC2600 User Manual

To specify a trusted computer:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Security > Block Sites.
The Block Sites page displays.
5.
Scroll down and select the Allow trusted IP address to visit blocked sites check
box.
6.
In the Trusted IP Address field, enter the IP address of the trusted computer.
7.
Click the Apply button.
Your settings are saved.
Manage Network Access Control Lists
You can use access control to block or allow access to your network.
To manage devices that are allowed or blocked:
1.
Launch a web browser from a WiFi-enabled computer or mobile device that is
connected to the network.
2.
Type http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Security > Access Control.
The Access Control page displays.
5.
Select the Turn on Access Control radio button.
User Manual46Control Access to the Internet
Nighthawk AC2600 Smart WiFi Router Model AC2600

NETGEAR Nighthawk AC2600 Specifications

General

WiFi Range	Very large homes
Antennas	4 external antennas
Beamforming	Yes
MU-MIMO	Yes
Memory	128MB Flash and 512MB RAM
WiFi Technology	802.11ac
WiFi Performance	AC2600 (800 + 1733 Mbps)
Processor	Dual Core 1.7GHz
Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports
Security	WPA2