NETGEAR Nighthawk AC2600 User Manual

To enable password recovery:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Administration > Set Password.
The Set Password page displays.
5.
Select the Enable Password Recovery check box.
6. Select two security questions and provide answers to them.
7.
Click the Apply button.
Your settings are saved.
Recover the admin Password
If you set up the password recovery feature, you can recover your router admin password.
To recover your router admin password:
1.
Launch a web browser from a computer or mobile device that is connected to the
network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Click the Cancel button.
If password recovery is enabled, you are prompted to enter the serial number of the
router.
The serial number is on the router label.
4.
Enter the serial number of the router.
5.
Click the Continue button.
A window opens requesting the answers to your security questions.
User Manual92Manage Your Router
Nighthawk AC2600 Smart WiFi Router Model AC2600

NETGEAR Nighthawk AC2600 Specifications

General

WiFi Range	Very large homes
Antennas	4 external antennas
Beamforming	Yes
MU-MIMO	Yes
Memory	128MB Flash and 512MB RAM
WiFi Technology	802.11ac
WiFi Performance	AC2600 (800 + 1733 Mbps)
Processor	Dual Core 1.7GHz
Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports
Security	WPA2