NETGEAR Nighthawk AX6 Series User Manual

5. Select the use other operation mode check box.
6. Select the Enable Bridge Mode radio button.
7. Click the setup bride mode wireless settings button.
The Wireless Settings window opens.
8.
Specify the settings of the other router to which this router will connect:
a.
Select the wireless network from the menu:
•
Wireless Networks (2.4Ghz b/g/n)
•
Wireless Networks (5Ghz a/n/ac)
For 802.11ac or 802.11ax mode, select 5 GHz.
b.
In the Name (SSID) file, enter the wireless network name (SSID).
c. In the Security Options section, select a radio button.
d.
If the Password (Network Key) field displays, type the WiFi password (network
key) that you use to connect wirelessly to the other router.
9. Click the Apply button.
The window closes and you are returned to the main Wireless Settings page.
10. Click the Apply button on the main Wireless Settings page.
Your settings are saved.
User Manual84Manage Network Settings
Nighthawk AX6 6-Stream AX4300 WiFi Router

NETGEAR Nighthawk AX6 Series Specifications

General

Beamforming	Yes
MU-MIMO	Yes
Model	RAX50
OFDMA	Yes
Processor	1.5 GHz quad-core
USB Ports	1 x USB 3.0
Security	Supports WPA3
Memory	512MB DDR3 RAM
WiFi Technology	Wi-Fi 6 (802.11ax)
Antenna	4 x external antennas