NETGEAR Nighthawk AX8

Wall mount your router
You can wall mount your router using the wall-mounting holes on the bottom of your
router.
Note: We recommend using M3 x 20mm screws appropriately mounted to the wall.
Figure 6. Bottom of the router
To wall-mount your router:
1. Drill holes in the wall where you want to wall-mount your router.
2. Insert wall anchors in the holes.
3.
Insert screws into the wall anchors, leaving 3/16 inch (0.5 cm) of each screw exposed.
4. Align the router’s wall-mounting holes with the screws and mount your router.
User Manual16Hardware Setup
Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router