EasyManuals Logo

NETGEAR Nighthawk AX8 User Manual

NETGEAR Nighthawk AX8
175 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #164 background imageLoading...
Page #164 background image
Some Internet service providers require you to use the MAC address of the computer
initially registered on the account, but this is an unusual situation. You can view the MAC
address on the Attached Devices page of the router web interface.
Troubleshoot with the LEDs
By default, the router uses standard LED settings.
Standard LED behavior when the router is powered on
After you turn on power to the router, verify that the following sequence of events occurs:
1.
When power is first applied, verify that the Power LED is lit.
2.
After about two minutes, verify the following:
The Power LED is lit.
The Internet LED is lit.
The WiFi LED is lit (unless you turned off the WiFi radio).
You can use the LEDs on the front panel of the router for troubleshooting.
Power LED is off or blinking
This could occur for a number of reasons. Check the following:
Make sure that the power adapter is securely connected to your router and securely
connected to a working power outlet.
Make sure that you are using the power adapter that NETGEAR supplied for this
product.
If the Power LED blinks slowly and continuously, the router firmware is corrupted.
This can happen if a firmware update is interrupted, or if the router detects a problem
with the firmware. If the error persists, it is likely that a hardware problem exists. For
recovery instructions, or help with a hardware problem, contact Technical Support
at netgear.com/support.
LEDs never turn off
When the router is turned on, the LEDs light for about 10 seconds and then turn off. If
all the LEDs stay on, this indicates a fault within the router.
User Manual164Troubleshooting
Nighthawk AX8 8-Stream Tri-Band WiFi 6 Router

Table of Contents

Other manuals for NETGEAR Nighthawk AX8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk AX8 and is the answer not in the manual?

NETGEAR Nighthawk AX8 Specifications

General IconGeneral
Modulation1024-QAM
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standardsWi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channel bandwidth160 MHz
Top Wi-Fi standardWi-Fi 6 (802.11ax)
WLAN data transfer rate (max)6000 Mbit/s
WLAN data transfer rate (first band)1200 Mbit/s
WLAN data transfer rate (second band)4800 Mbit/s
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Memory card slot(s)No
Ethernet LAN (RJ-45) ports5
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity2
WAN connection typeRJ-45
Processor cores4
Processor frequency1800 MHz
Electromagnetic compatibilityFCC 15 B EN 55022 (CISPR 22), B C-Tick N10947
Security algorithms128-bit AES, WPA, WPA2, WPA2-PSK
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, WAN
Output current3.16 A
Output voltage19 V
Power source typeAC
AC input frequency50 - 60 Hz
Package depth307 mm
Package width238 mm
Package height129 mm
Package weight2380 g
Number of products included1 pc(s)
Cables includedLAN (RJ-45)
Windows operating systems supportedWindows 10, Windows 2000, Windows 7, Windows 8, Windows Vista, Windows XP
Routing protocolsRIP-1, RIP-2
Data link protocolsTCP/IP, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, SMB
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 90 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth202 mm
Width305 mm
Height161 mm
Weight1281 g

Related product manuals