NETGEAR Nighthawk CM2050V User Manual

- Windows Vista
- Windows XP
- Windows 2000
- Mac OS
- Other operating systems running a TCP/IP network
•
Compatible web browser:
-
Microsoft Internet Explorer 5.0 or later
-
Firefox 2.0 or later
-
Safari 1.4 or later
- Google Chrome 11.0 or later
•
Xfinity cable broadband Internet service
Note: An uninterruptible power supply (UPS) can be purchased separately for continued
service during power outages. For a list of supported UPS models, visit
netgear.com/support/product/CM2050V.
Install and Activate Your Cable Modem
The cable modem provides a connection between your cable Internet provider’s network
and your computer, router, or WiFi router.
Set Up the Hardware
To set up your cable modem:
1.
Collect your Xfinity account information.
Collect your Xfinity account information, such as your account mobile phone number,
user name, password, and account number.
2.
Turn off and disconnect existing modems and routers.
If you are replacing a modem that is currently connected in your home, unplug the
modem and plug the new cable modem into the same outlet.
3. Connect a coaxial cable.
Use a coaxial cable to connect the cable port on your cable modem to a cable wall
outlet.
User Manual11Hardware Setup
Nighthawk CM2050V 2.5 Gbps Ultra-High Speed Cable Telephony Modem

NETGEAR Nighthawk CM2050V Specifications

General

Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Cables included	AC, LAN (RJ-45), Phone (RJ-11)
Quick start guide	Yes
Product color	Black

Weight and Dimensions

Depth	172 mm
Width	94 mm
Height	208 mm
Weight	493 g