NETGEAR Nighthawk CM2050V User Manual

Connect Your Cable Modem to a Router After Installation
and Activation
After you install the cable modem and activate your Internet service, you can disconnect
the computer and connect a router to the cable modem.
To connect your cable modem to a router after installation and activation:
1.
Reboot your cable modem by unplugging the power cable from the cable modem
and plugging it back in.
Wait for the Online LED to stop blinking and light solid white.
2. Use an Ethernet cable to connect the Ethernet port on your cable modem to the
WAN or Internet port on the router.
3. Power on your router.
4. Wait until your router is ready.
5. Connect a computer to your router.
For more information about how to set up your router, see the documentation that
came with your router.
User Manual14Hardware Setup
Nighthawk CM2050V 2.5 Gbps Ultra-High Speed Cable Telephony Modem

NETGEAR Nighthawk CM2050V Specifications

General

Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Cables included	AC, LAN (RJ-45), Phone (RJ-11)
Quick start guide	Yes
Product color	Black

Weight and Dimensions

Depth	172 mm
Width	94 mm
Height	208 mm
Weight	493 g