6
4. Connect your devices.
a. Check to make sure that WiFi is enabled on your computer or
mobile device and search for WiFi networks. Refer to the following
table or the manual for your WiFi-enabled device for further details
on searching for WiFi networks.
b. To view the WiFi name and password, press and release the Power
button to toggle through Nighthawk M1 router LCD displays.
Windows
Click the Internet Access icon, which is usually found on
the bottom right side of your screen.
Mac Select WiFi > Network.
Mobile
devices
Tap Settings > WiFi.
c. Select the WiFi name displayed on your Nighthawk M1 screen.
d. Enter the WiFi password exactly as shown on the Nighthawk M1 screen.
NOTE: Your password is case-sensitive. We strongly recommend that
you change the default admin password.
To Next Page
Loading...
