NETGEAR Nighthawk M1 Quick Start

8
Upload Media Files to the Nighthawk M1 Router
You can upload media files to either a micro SD card or a USB drive
connected to the Nighthawk M1 router. Micro SD cards and USB
drives are sold separately. To enable media and Ethernet support, you
must first select the Charge Only option (Settings > Router Setup
> Use USB port for).
¾ To upload media files to the Nighthawk M1 router with a
computer:
1. Log in to the Nighthawk M1 router home page.
2. Click the MyMedia tab.
3. Drag and drop your files onto the page.
Use the Nighthawk M1 Router to Charge Other Devices
If the battery power is low on your smartphone or other device, you
can give it a boost by connecting it to the M1’s USB port A connector.
Jump boost begins automatically once the devices are connected.

NETGEAR Nighthawk M1 Specifications

General

Model	MR1100
WiFi Technology	802.11ac
WiFi Speed	Up to 1 Gbps
Battery	5040 mAh
Dimensions	105.5 x 105.5 x 20.35 mm
Weight	240 g
LTE Category	LTE CAT 16
Max Theoretical Downlink Speed	1 Gbps
Max Theoretical Uplink Speed	150 Mbps
Wi-Fi Bands	2.4 GHz, 5 GHz
Wi-Fi Max Theoretical Speed	1 Gbps
SIM Type	Nano SIM
Ethernet Ports	1 x Gigabit Ethernet
USB Ports	1 x USB 3.0
SIM Card Slot	Yes (Nano)
External Antenna Ports	2 TS-9 connectors