NETGEAR Nighthawk R6700 User Manual

Use VPN to Access Your Network
152
Nighthawk AC1750 Smart WiFi Router
The following screen displays:
9. Click the Install button.
The screen displays the progress of the installation and then displays the final installation
screen.
10. Click the Finish button.
11. Unzip the configuration files that you downloaded and copy them to the folder where the
VPN client is installed on your device.
For a client device with Windows 64-bit system, the VPN client is installed at
C:\Program files\OpenVPN\config\ by default.
12. For a client device with Windows, modify the VPN interface name to NETGEAR-VPN:
a. In Windows, select Start > Control Panel > Network and Internet > Network
Connections.
b. In the Local
Area Connection list, find the local area connection with the device
name TAP-Windows Adapter.
c. Select the local area connection and change its name (not its device name) to
NETGEAR-VPN.
If you do not change the VPN interface name, the VPN tunnel connection will fail.

NETGEAR Nighthawk R6700 Specifications

General

WiFi Speed	AC1750 (450 + 1300 Mbps)
USB Ports	1 x USB 3.0
Antenna	3 external antennas
Beamforming	Yes
Wireless Standard	802.11a/b/g/n/ac
Operating Temperature	32°F to 104°F (0°C to 40°C)
WiFi Technology	802.11ac
Ethernet Ports	4 x Gigabit Ethernet
Frequency Band	2.4 GHz and 5 GHz
Memory	128 MB Flash, 256 MB RAM
Security	WPA2-PSK
Dimensions	11.22 x 7.26 x 1.97 inches
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Processor	1GHz Dual Core Processor