Hardware Setup
9
Nighthawk AC1750 Smart WiFi Router
Unpack Your Router
Your package contains the following items.
Nighthawk AC1750 Smart WiFi Router
Antennas (3)
Ethernet cable
Power adapter
Figure 1. Package contents
Attach the Antennas
The router comes with three antennas.
To attach the antennas:
1. Align the antennas with the antenna posts on the router.
2. Attach the antennas on the threaded antenna posts.
3. Position the antennas for the best WiFi performance.
NETGEAR recommends that the center antenna be vertical and that you aim the others
outward at 45-degree angles, as shown.
To Next Page
Loading...
