NETGEAR Nighthawk R7450 User Manual

Ports, Buttons, and Connectors on the Back
Panel
The back panel of the router> provides ports, buttons, antenna connectors, and a DC
power connector. For information about attaching the antennas, see Attach the Antennas
on page 10.
Figure 2. Router back panel
In addition to the three antenna connectors, viewed from left to right, the back panel
contains the following components:
•
Reset button. For information about using the Reset button, see Return the router
to its factory default settings on page 102.
•
Ethernet LAN ports. Use the four Gigabit Ethernet RJ-45 LAN ports to connect the
router> to LAN devices.
•
WAN port. Use the yellow Gigabit Ethernet RJ-45 WAN port to connect the router>
to a modem.
•
Power On/Off button. Press the Power On/Off button to provide power to the
router>.
•
DC power connector. Connect the power adapter that came in the product package
to the DC power connector.
User Manual12Hardware Overview of the
Router
Nighthawk AC2600 Smart WiFi Router Model R7450

NETGEAR Nighthawk R7450 Specifications

General

Beamforming+	Yes
MU-MIMO	Yes
VPN Support	Yes
Parental Controls	Yes
Guest Network	Yes
WiFi Technology	802.11ac Dual Band
WiFi Performance	AC2600 (800 Mbps + 1733 Mbps)
Ethernet Ports	5 x 10/100/1000 Mbps Gigabit Ethernet ports
USB Ports	1 x USB 3.0
Processor	Dual Core
Memory	256MB RAM
Antenna	3 external antennas
Dimensions	11.22 x 7.26 x 1.97 inches