11
Easy single click setup to back up the Window PCs on the home network
Automatic, continuous incremental backup of all the changes
Easily restore deleted files by going back to older snapshots
Safeguard all your precious data, photos, videos
Beamforming+
Beamforming+ technology boosts speed, reliability and range of WiFi connections. The router
automatically uses NETGEAR Beamforming+ technology to enhance WiFi performance with 802.11ac
WiFi devices. Because it’s automatic, you don’t have to turn on Beamforming+ or configure it. When you
connect to the WiFi network, Beamforming+ focuses on your location for even better WiFi performance
and speed. Beamforming+ locks onto your laptop, tablet, or smartphone, and follows as you move from
place to place, so you keep your optimal WiFi connection.
VPN Support
VPN service allows remote access to your home network with a secure connection. After you set up VPN
service, you can use VPN to access the router’s USB drive and media and to access your Internet service
at home. To set up VPN service, follow these high-level steps:
1. Specify the VPN service.
2. Install OpenVPN software on your computer.
3. Use a VPN tunnel.
iTunes Server
iTunes Server lets you play music with your Windows or Mac iTunes app from a USB drive that is
connected to the router USB port. You can also use the Apple Remote app from an iPhone or iPad to
play music on any AirPlay devices, such as Apple TV or AirPlay-supported receivers.
To specify iTunes server settings:
1. On your iPhone or iPad, find and connect to the WiFi network.
2. Launch the Remote App.
3. Click the Add an iTunes Library button.
A passcode displays.
4. Specify the passcode in the router.
a. Launch an Internet browser from a computer or wireless device that is connected to the
network.
b. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
c. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.